Changing The Default Settings - Clatronic CTV 792 Bedienungsanleitung

Understanding
the menu structure
Using the menu
56
05_CTV792_GB 56
Scrolling
Manual: Press the I (Fig. 2/25) or
control to scroll forward or back.
Automatic: Press the ENTER button (Fig. 2/7). The pictures change auto-
matically.
Rotating a photo
You can use the Cursor buttons to rotate a photo during replay:
Rotate clockwise for 90°: Cursor Button „ "
Rotate counter-clockwise for 90°: Cursor Button „ "

Changing the default settings

A large number of default settings can be comfortably changed via the screen
menu.
Press the SETUP-button (Fig. 2/9) on the remote control to start the menu for
changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote control
and the menu. The difference is: If you change the default settings via the
remote control, these changes will only be valid until the DVD-Player is
switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu: The main level is represented by graphical symbols.
Sub-menu: The corresponding sub-menu options can be found under each
of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 2/8) ( / ) on the remote control to browse
through the main menu.
In contrast to this, you must use the Cursor Buttons ( / ) to move in the
sub-menu.
Select a menu option with the ENTER-button (Fig. 2/7).
Use the ENTER-button also to select an option (e.g. "PAL" in the illustration
on the left). The selected option (in the example „PAL") is now highlighted.
I -button (Fig. 2/26) on the remote
26.03.2008, 15:06:09 Uhr