MAC Audio MAC 410 Bedienungsanleitung Seite 73

notice:
The graphic in this manual is for reference only, and may be different from the actual unit.
Reference to actual unit is suggested.
1. srC / power on/off ( ) button: Press to turn the unit ON. When on, press to switch the
playing source (Radio / Disc / SDHC / USB / Phone / AV-IN1 / AV-IN2 / DAB / jLink HDMI).
Press and hold to turn the unit off
2. rotary encoder Knob: Rotate the knob to adjust the volume from 0 to 50. Press the knob
momentarily to mute the audio. Press the knob again to restore the audio.
3. reVerse [ ] Button: Press
a lower station.
4. forwArD [
higher station.
5. ir remote sensor: Used to receive command signals from the remote control.
6. interface Cover: Covers the MicroSD card slot, USB slot and Reset button.
7. usB slot: Used to connect an iPod
playback of music/video file.
8. Micro sD card slot: Playback of music/video files
9. reset Button: Press this button to reset the system settings (except password settings) and
to correct a system halt or other illegal operation. Use the tip of a pen to press the Reset
button.
10. tft monitor [open/close] Button: Press to activate the automatic mechanical system and
move the TFT monitor into the viewing position. Press again to close the TFT. With the monitor
open, press and hold to enter display angle setting mode, and rotate the knob to adjust. Press
and hold after adjustment, to save TFT position or let the feature time-out after 4 seconds
11. A/V input: Attach a compatible A/V device.
12. Display (Disp) button:
Touch to adjust the screen brightness.
Touch and hold to turn the screen off.
When the TFT is closed, press once and repeat to cycle through clock time,
metadata, RDS information, etc. The type of information depends upon selected source
13. eJeCt [ ] Button: Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the
disc is ejected and the unit will change to radio operation. If the disc is not removed from the
unit and the button is pressed again, the disc will be re-loaded. If the disc is not removed from
the disc slot within 10 seconds of being ejected, it will be automatically reloaded to prevent it
from being accidentally damaged.
14. Disc slot: Accepts DVD/CD/MP3 discs. If the unit is turned on, playback begins when a disc
is inserted.
15. lCD screen and touch screen: Touch icons on this screen to access menus or control
function
to seek backward. With the radio mode, Press
] Button: Press to seek forward. With the radio mode,Press
, MP3 player or flash device connection adapter for
®
73
to seek
to seek a