Recalling A Station - MAC Audio MAC 410 Bedienungsanleitung

3. Touch the preset number in which you would like to store the current station. The station
frequency is displayed at the top of the menu. The preset number will appear highlighted. The
station frequency will be stored in the highlighted preset. The station will be displayed on the
Tuner TFT LCD screen. A station can also be stored by touching and holding the preset icon to
store the station currently tuned as a preset.

recalling a station

1. Select a preset band (if needed).
2. Touch an on-screen preset icons (P1 through P6) to select the corresponding stored station.
Auto store (As)
To select six strong stations and store them in the current band. This feature is most useful when
travelling in an area where you are not familiar with the local stations.
1. Select a band (if needed).
2. Touch the AS icon to activate the Auto Store function. FM Band 1 will be filled if enough stations
are detected. The AM Bands function in a similar manner. As new stations are found they will
replace stations already stored in that band.
note: if stations have already been set as favorites, activating the Auto-store feature will
erase those stations and enter the new strong stations.
local/Distance radio station seeking
When the Local function is on, only radio stations with a strong local radio signal are played.
To activate the Local function in the AM/FM tuner mode, touch the More on the Tuner TFT LCD
screen. The Local/Distance icon is revealed. Touch Local or Distance to turn the local/distance
function on or off. When the Local or Distance function is active, the Local or Distance indicator at
the top of the screen is illuminated.
Preset Station Screen
105