Denon D-M51DVS Bedienungsanleitung Seite 35

[2] Delay time (distance setting)
• Input the distances from the listening position and the various speakers to set the surround delay time.
• Upon shipment from the factory default the delay time is set to the default values in step 3 below.
Preparation:
Measure the distance from the listening position to the various speakers.
1 If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
2 At the system setting changing menu screen, use the
cursor buttons to select "DELAY TIME", then press the
1
ENTER button.
Remote control unit
• The delay time setting screen appears.
DELAY TIME
SET THE DISTANCE TO EACH SPEAKERS
UNIT
DEFAULT
FRONT
SUBWOOFER
SELECT :
• The unit for the distance can be switched between "m"
(meters) and "ft" (feet) using the
If you do not want to change the unit, press the ª cursor
button to proceed to the next step.
3 At "Default", select "Yes" to set the delay times for the
different speakers to the default values.
Yes: The values are set to the defaults.
B
No: The current settings are retained.
B
FL
Subwoofer
Listening position
0
ENTER
Remote control unit
METERS FEET
2 . 7 m
2 . 7 m
FINISH : ENTER BUTTON
and 1 cursor buttons.
0
L : Distance between
1
speaker and listening position
FR
L : Distance between front speakers
2
and listening position
4 Use the • and ª cursor buttons to select the speaker, then
use the
0 and
the speaker and the listening position.
and
• The distance changes by 0.1 meters (or 1 foot when the
unit is set to feet) each time the
pressed. Select the value closest to the measured
distance.
DELAY TIME
SET THE DISTANCE TO EACH SPEAKERS
UNIT
DEFAULT
FRONT
SUBWOOFER
SELECT :
Make sure the difference in the distances set for the
various speakers is no greater than 3.0 meters (10 feet).
If an inappropriate distance is set, "CAUTION: OUT OF
SETTING RANGE" is displayed. Change the position of the
speaker and make the setting over.
5 Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
subwoofer
1 cursor buttons to set the distance between
1 cursor button is
0 and
METERS FEET
2 . 7 m
2 . 7 m
FINISH : ENTER BUTTON
Remote control unit
ENGLISH
ENTER
35