Denon D-M51DVS Bedienungsanleitung Seite 31

4 Press the ENTER button to display the
menu's setting screen.
On the setting screen, the selected
item is displayed in yellow and the
values of the other items are
displayed in green.
[1] TV screen size setting
QUICK SETUP MENU
SELECT YOUR TV SYSTEM
4 : 3 PAN & SCAN
4 : 3 LETTER BOX
16 : 9 WIDE
4 : 3 TELEVISION
SELECT THIS TO PLAY WIDE DVDs
IN THE PAN & SCAN MODE.
(WITH THE SIDES OF THE PICTURE
CUT OFF)
SELECT :
• The currently set value is displayed in yellow.
5 Use the • and ª cursor buttons to
select the desired TV screen size and
display type.
The selected TV screen size is
displayed in yellow
description is displayed in green.
QUICK SETUP MENU
SELECT YOUR TV SYSTEM
4 : 3
4 : 3
16 : 9 WIDE
16 : 9 WIDE TELEVISION
SELECT THIS TO PLAY WIDE DVDs
IN THE FULL-SCREEN MODE.
SELECT :
DECISION : ENTER BUTTON
ENTER
Remote control unit
DENON
DECISION : ENTER BUTTON
and the
Remote control unit
DENON DENON
PAN & SCAN
LETTER BOX
6 Press the ENTER button to set the
selected setting.
• The screen shown below appears.
[2] Speaker system settings
QUICK SETUP MENU
SELECT TOUR SPEAKER SYSTEM
SELECT : DECISION : ENTER BUTTON
• "Return" is displayed in yellow.
• The currently set value is displayed in green.
• If you do not want to change the setting, press the ENTER
button at "Return". The screen in step 2 reappears.
• To change the setting, proceed to step 7 below.
7 Use the • and ª cursor buttons to
select the speaker system to be used.
8 Press the ENTER button to set the
selected setting.
• The setup screen in step 2 reappears.
The setup mode is quit in step 9.
/
The setup mode can also be quit by
using the • and ª cursor buttons at
the setup screen to select "EXIT
SETUP" then pressing the ENTER
button.
ENTER
Remote control unit
DENON
EXIT
2CH VIRTUAL
2CH VIRTUAL&SW
FRONT SMALL
SUBWOOFER YES
Remote control unit
ENTER
Remote control unit
ENGLISH
31