Kapego 861203 Bedienungsanleitung Seite 17

Manual
Article No.: 861203
6.4. Assigning Scenes Fade time
6.4.1. Press and hold the „Scene" button to select the Scene where you wish to assign fade
time to, until its indicator is flashing.
6.4.2. Keep on holding the selected „Scene" button, and adjust simultaneously the „Master
control fader" all ways up to 600s to set desired fader level.
6.4.3. Once you're satisfied with the setting, release the selected „Scene' button to save it. All
LED indicators flash repeatedly 3 times.
6.4.4. To assign fade time for additional scenes, repeat Step 6.4.1 through 6.4.3.
NOTE:
Once you've saved fade time for all of your scenes, please move back the „Master Control Fader"
to the initial position.
6.5. Setting OFF Fade time
6.5.1. Recording Scene mode enables.
6.5.2. Adjust the „Master Control Fader" all ways up to 600s to set the desired level.
6.5.3. Once you're satisfied with the setting, tap the „O/P" button to save it. All LED indicators
will flash repeatedly 3 times.
6.5.4. Exit the Recording Scene mode.
6.6. Setting the Total Number of Controllable Channels
6.6.1. Disconnect the main power of X-Fade-6 Pro.
6.6.2. Select the channel total number which you wish to control. When using the „Channel
Fader 1", the channel total which you wish to control is „1"; when using the „Channel
Fader 2", the channel total which you wish to control is „2", the rest can be deduced and
in the function, the channel total which you wish to control is up to „6".
6.6.3. Should adjust the „Master Control Fade" over 5 position when selecting the channel
number
6.6.4. Keep and hold the „O/P" button, and power on the X-Fade-6 Pro, all LED indicators will
come on. Release the „O/P" button, and all LED indicators will flash repeatedly 3 times.
8