Panel / Connections; Infrared Sensor - Kapego 861203 Bedienungsanleitung

Manual
Article No.: 861203

5. Panel / Connections

4
7
1. Channel Faders (1~6):
Used to control the output level of each corresponding fixture channel.
2. Master Control Fader:
Used to control the overall output level for all Channels1~6 or control the master level for all Scenes.
3. Scene Buttons (1~6):
To select the corresponding programmed scene to play back.
4. Scene LED indicators (1~6):
These 6 LEDs detail the current fader level for Scenes1-6. The LED indicators will reflect the fader
level changes in real time.
5. O/P Button:
To press the O/P button to close all channel1-6 output or enter/exit Recording Scene Mode.
6. O/P LED indicators:
To indicate the output state is turned on or off.

7. Infrared Sensor:

To receive infrared remote control signs from Infrared Remote.
8. DMX In / DMX Out:
3-Pin green terminal.
9. DC Power IN:
4-Pin for DC12~24V Power in
1 2
3
6
5
5
8 9