Rosch Computer CM64-AL Benutzerhandbuch Seite 15

DIMM Power LED and PCI Standby Power LED
Warning:
. .
.
.
.
.
.
.
When the DIMM Power LED and/or PCI Standby Power LED lit red, it
indicates that power is present on the DIMM sockets and/or PCI
slots. Power-off the PC then unplug the power cord prior to installing
any memory modules or add-in cards. Failure to do so will cause
severe damage to the system board and components.
Quick Setup Guide
DIMM Power LED
PCI Standby Power LED
JP2
1
2
On: Default
3.3VSB Standby Non-PCI 2.2 spec.
Power to PCI slots
PCI 2.2 spec.
1
1
2
Off:
15