Password - Minox DTC 400 Slim Bedienungsanleitung

row of the input field you can set the current date. To begin
with, the field with the value for the month is selected.
The value in the selected field can be adjusted by pressing
the up/down arrow keys (11). By pressing the right arrow
key (11) or confirming with OK (11) you can move to the
next input field. Use the left arrow key (11) to return to an
input field, or to perform any changes.
Time:
In the second row of the input field you can set the current
time. To access this row after entering the year, press the
right arrow key (11) or confirm the year with OK (11). To
adjust the values proceed as described for setting the date.
The time is specified in the format Hour/Min / AM/PM
(00:00 – 12:00 = AM, 12:00 – 0:00 = PM).
When you have made all settings, press the OK button
(11) to save your settings. The input field AM/PM must
be selected in order to save the settings. Press the menu
button (13) to return to the main menu without changing
the settings.
Note: Activate the moon phase calendar by entering
precise information. The image of the moon phase will
appear on every picture or video clip.

Password

This function allows you to enter a 5-digit number com-
bination to safeguard your DTC 400 against possible mis-
use. You will not be able to access the "Setup mode"
(SETUP = setup mode, main switch (12) in top position)
43