General - Titan BAZ-L Originalbetriebsanleitung

2.

General

Many thanks for your confidence in the technology of
These operating instructions are intended to simplify familiarisation with the Dispenser and
the possibilities of application for the intended purpose. The operating instructions contain
important information concerning the safe, proper and efficient use of the strapping
tool. Following the instructions helps avoid risks, reduces repairs and downtimes and
increases reliability and life of the dispenser.
The operating instructions must always be available at the place of operation of the
dispenser. They must be read and observed by persons concerned with work on the
dispenser. This work specifically includes operation, refilling of operating material, fault
elimination and maintenance.
Apart from the operating instructions and the regulations for the prevention of accidents
being applicable in the country where the unit is operated and on site the recognized
technical rules for safety-related and competent works have to be observed.
Explanatory notes on the warning and instruction symbols:
Caution!
Used to indicate danger to life and limb.
Attention!
Used to indicate danger that can result in material damage.
Notice!
Used to indicate general information and information which if ignored can
cause disruptions in operation.
The manufacturer reserves the right to make changes to the scope of delivery
at any time for the purpose of improving the product.
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2015 all rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form,
neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
BAZ-L
TITAN Umreifungstechnik GmbH & Co. KG
is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.
H 766 EU 37/13
Seite 11 von 34