Gastroback DESIGN STABMIXER ADVANCED PRO E 40976 Bedienungsanleitung Seite 38

Note:
Don't chop extremely hard food, such as ice cubes, nutmeg, coffee beans and
grains.
WARNING:
unplug the appliance before opening the chopper and taking out the food, laying
down the appliance or assembling/dismantling the mini-chopper.
Before connecting the appliance to the mains power supply, always ensure that the
appliance is assembled correctly, according to the following instructions. Do not
touch the blade of the chopper with your hands or any objects (i.e. hair, clothes, tis-
sue), when it is mounted and the appliance is connected to the mains power supply.
1. Prepare your food.
WARNING:
70 degrees. Let the boiling food cool down a little bit before filling it into the vessel.
2. Ensure, that the appliance is unplugged.
WARNING:
Always handle the tools by the shaft.
3. Place the blade of the chopper on the centre pin of the vessel. Than turn it clock-
wise to lock it into place. Always place the chopper vessel on the non-slip-rubber
base to avoid injuries.
4. Place the prepared food into the chopper and place the lid onto the vessel. Fill
the vessel only up to the 500 ml mark. Place the shaft of the chopper onto the
motor block and press together until it snaps into place. There may be no gap
between the motor housing and the chopper. The blender shaft must be locked
firmly and may not wobble.
5. Choose the speed with the variable control switch.
6. Connect the power plug to a suitable wall power outlet.
7. Hold on to the chopper vessel with one hand and press the ON-button to start
the motor.
CAUTION:
us operation for more than 1 minute to avoid overheating. If processing large quan-
tities of food, regularly interrupt the operation and unplug the appliance for a few
minutes, allow the motor to cool down.
8. Chop your food to the desired quality, but at least after 1 minute of continuous
operation release the ON-button.
38
Always release the ON-button, wait until the motor stops and
The chopper vessel is not heat resistant. The max. temperature is
The blade of the chopper is very sharp. Do not touch the blades.
Do not use the appliance with the chopper attachment in continuo-