Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN - Please read the instructions before using the product.
These instructions apply to the hip belt for Combi chairs.
Intended use
The hip belt fits all Combi chairs.
The hip belt is well suited for users who need trunk support, and can be adjusted to the individual user.
Installation
Remove the backrest by removing the clips on both sides (1). Lift up the backrest. Place the hip belt from the bottom
up on to the backrest. Reinstall the backrest by placing it down into the holes in the frame. Put both clips back into the
holes in the frame (1).
Adjustment and use
The hip belt can be adjusted to the individual user by loosening or tightening the strap on the front (2) or on the back of
the hip belt (3).
Maintenance
The hip belt can be removed and machine washed at up to 30 degrees Celcius. It should not be dried in a tumbler dryer.
The hip belt can be cleaned with common cleaning solutions without abrasive or etching properties. It is not
recommended to use solvents or chlorine.
Warning!
•
Maximum weight of user: 100 kg.
•
The hip belt must only be used as described under the section "Intended use".
4
Werbung
