Installing The Software - JVC VN-C625 Handbuch

Settings (Step 2 Network Settings)

2-1 Installing the Software

To operate this camera, you will have to install the necessary software according to
the following procedure from the CD-ROM supplied.
Installing the V.Networks Controller
1. Execute "Setup.exe" in the [JVC] folder.
2. Follow instructions on the screen to install the software.
3. If installation is successful, the † "V.Networks Controller" icon will be displayed in the [Start] †
[Programs] [V. NETWORKS] folder.
Installing the VN-C625U Setup Tool
1. Execute "Setup.exe". This is located inside the [Setup] folder of the [JVC] folder.
2. Follow instructions on the screen to install the software.
3. If installation is successful, the † "VN-C625U Setup Tool" icon will be displayed in the [Start] †
[Programs] [V. NETWORKS] folder.
E-24
~~~~~~~~~~~~~~~~~~~