Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11. Technical Data
Nominal voltage range:
Frequency range:
Input resistance:
Measurement current:
Surge voltage strength :
Indicator group:
Display:
Measurement range / limit deviation: 50 ... 1000 V DC ± 2,5% + 5 digits
On-time:
Construction:
Operating temperature:
Self-test:
Power supply:
Design:
Standards:
Test label:
Dimensions / weight:
l
Glomar AG
Seestrasse 11
50 ... 11000 V AC / 16000 V DC
0 ... 500 Hz
55,8 MΩ
0,29 mA at 16000 V DC
> 300 kV (VDE test report available)
I and III
three red LEDs for voltage > 50 V
one green LED for standby and tensio-free
two-line LC-display with backlight for indication of voltage,
type of voltage, frequency and battery condition
acoustic signal at > 50 V AC / 120 V DC
50 ... 1000 V AC ± 5% + 10 digits
1,01 ... 16,00 (16,50) kV DC ± 2,5% + 5 digits
1,01 ... 11,00 (12,00) kV AC ± 5% + 10 digits
15 min,
auto-off when tension-free
for indoor and outdoor installations
IP 65, device can be used in moist environments
–15°C ... + 55°
function and protective resistors
obligatory before indication of measurement results
9 V block IEC 6LR61 / 6LF22 alkali-manganese
indication of battery condition
two-pole voltage tester with firmly attached high-tension
test probes made of GRP with moulded resistor decades,
approx. 27,9 MΩ each probe impact resistant,
dust proof plastic casing with unbreakable display cover,
protection category IP 65
twin insulated PUR hose cable
connecting line additionally protected by currogated tube
EN/IEC 61243-2 high voltage tester
EN/IEC 60071 surge voltage strength
further applied standards:
EN/IEC 61010 and VDE 0105-100
(further details see risk analysis)
of the last examination on the device
1,0 kg / approx. 1150 x 200 x 60 mm
Length of test probes 790 mm
Case (accessory) 6,9 kg
1242 x 272 x 122 mm
l
l
CH-9326 Horn
T +41 71 841 70 70
15
l
www.glomar.ch
14
Werbung
