Programming The Display Languages; Special Notes - Ecatronic FlAT SAT 650/800 1 P Installationshandbuch

4.7 Programming the display languages

4.7.1
Languages can be programmed in the display are: Italian, Spanish, French, Eng-
lish, German and Dutch.
4.7.2
To access the language programming menu:
- Switch on the satellite dish by pressing ON (3)
- Wait for the start and then close the satellite dish by pressing the parking button (6).
- Wait for 5 seconds from closure, then press the satellite change button (4) and the park-
ing button (6) simultaneously.
- If this operation is performed correctly, the currently set language will appear on the
display, followed by 3 asterisks (ITALIAN ***, for instance)
- Press the satellite change button (4) several times in order to scroll through the menu
until the desired language appears.
- Save the selected language by pressing the parking button (6). 3 dots will appear after a
few seconds, confirming the new language.
- To leave the menu, press the satellite change (4) and parking (6) buttons simultaneously.

4.8 Special notes

The factory assembly position of the LNB is along the centre axis of the dish and in this po-
sition the LNB works properly in many places in Europe. However, if you are in a marginal
area of the satellite footprint, the adjustment of the LNB angle can be critical.
In particular, if you wish to receive from Astra 28E, Astra 19E or Hot Bird 13E satellites while
you are in Spain, Portugal, Italy or further afield, slightly loosen the screw that secures the
LNB in order to rotate it.
For more information, consult your dealer.
8
MOROCCO:
HOT BIRD 13 E (1=27°)
ASTRA 19 E (1=34)°
ASTRA 28 E (1=41°)
0 1
PORTUGAL
HOT BIRD 13 E (1=25°)
ASTRA 19 E (1=28)°
ASTRA 28 E (1=37°)
19
0
2
8.1
TURKEY:
HOT BIRD 13 E (2=22°)
ASTRA 19 E (2=15)°
ASTRA 28 E (2=5°)