Safety Instructions; Operation - Klarstein 10011294 Bedienungsanleitung

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to
avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the instruction manual are
not covered by our warranty and any liability.
• Read all the safety and operating instructions carefully and retain them for future reference.
• After removing the wine cooler from the package, make sure it is in good condition. In case of doubt, do not use it and
contact an authorized service center.
• Plastic bags, nails, etc. Should be kept out of the reach the operation manual carefully and check that the rating data on the
rating nameplate corresponds to your power supply.
• This wine cooler can only be used in the use of which it was designed. The manufacturer will not respond for any damage
due to improper use or repairs made by unqualified personnel.
• Before cleaning the wine cooler, make sure it is unplugged. Never clean the unit with an acid preparation, medical, dilution,
gasoline, oil or any other kind of chemical substance that could damage the refrigerator.
• Repair should only be made by authorized service centers.
• To reduce the risk of fire, replace only with same type fuse.
• Free standing installation only.
• Do not use extension cords.
• If the supply cord is damaged, it must be replaced by the manufacturer or service agent or similarly qualified person in
order to avoid hazard.
• Please screw off the door before throwing it away.
• Please keep the appliance away from any flammable substances.
• To avoid a hazard due to the instability of the appliance, it must be fixed according to the instructions.
• Do not use electrical appliances inside the food storage compartments of the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical,
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Place the appliance on a flat surface.
• Set the "WARM / COOL" switch and "AC/DC" switch to "OFF" position.
• For AC power supply, please use the AC wire, connect the output plug to " AC 220-240V" AC jack and connect the input
plug to the power socket. Turn the "AC/DC" switch to AC , and turn the "WARM / COOL" switch to WARM or COOL po-
sition to select the warm or cool function.
• For DC power supply, please use the cigarette car plug , connect the output plug to "12V " DC jack and connect the input
plug to the car power socket. Turn the "AC/DC" switch to DC, and turn the "WARM / COOL" switch to WARM or COOL
position to select the warm or cool function.
• For cool setting, turn the "WARM/COOL" switch to the "COOL" position. The Green light indicates that the unit is cooling.
• For warm setting, turn the "WARM/COOL" switch to the "WARM" position. The Red light indicates the unit is warming.

Safety Instructions

Operation

6