Assembly Of Mixing Blade - Bauer MTXH Betriebsanleitung

3.1.5 Assembly of Mixing Blade

The mixing blade is mounted with the accessories kit supplied along which contains all accessories for a proper
assembly.
As the blade's edges are sharp, it is necessary to wear adequate protective leather gloves.
Assembly:
1) The pins are driven into the boreholes until they hit the bottom. (Attention! It is essential that the slots of pins
are in direction of perimeter!!!)
4 pins
slot in direction of perimet.
2) The O ring is slid onto the hub if it has not been supplied so.
3) The mixing blade is put onto the hub.
11
Operating Instructions for BAUER TRACTOR TURBOMIX / Version X-2014