Telephoning With Several Call Partners; Handset Settings - Swissvoice Aeris154 Bedienungsanleitung

Aeris 154/154T
• Once the base station has been found, you are requested to enter the system PIN
(0000 on delivery). Press Select.
• If the registration is successful you will hear a confirmation signal.

Telephoning with several call partners

During a call you can make a second internal call (enquiry call), switch between call
partners (brokering) or simultaneously converse (3-way conference call) without the
need for two telephone lines.
Internal conversation / Internal call
• Press INT .
• Select the desired internal party and press Select.
If you receive an external call while you are on the phone to an internal call partner,
you will hear an incoming call alert. End the internal call by pressing the End call key.
Press the Talk key. You are connected to the external party.
Call transfer to another handset
You are conducting an external call and you want to transfer it to another handset.
• Press INT . Select the desired internal party and press Select.
• Press the End call key to transfer the call to the other handset.
Conference
You are conducting an external call.
INT
• Press , select the desired internal party.
• Long press key
connected to a conference.
• Any teleconference partner can press the End call key to leave the conference
and end the call.

Handset settings

Press Menu, select HS Settings and press Select.
•
• Select a function from the following list:
- Ring Setup – Select the desired ringer melody for internal and external calls.
- Tone Setup – Activate or deactivate the following options:
Key Tone – Every time a key is pressed, a brief beep is heard.
Battery Low – The batteries are almost empty. Insert the handset in the
base station for charging.
70
, when the internal party responds. The three call partners are
INT
Aeris 154/154T