Troubleshooting - Peiying PY-TR1072 Bedienungsanleitung

Troubleshooting

Symptom
Buttons does not work
No sound
Remote control does not work
properly
The Lechpol company declares that product PY-TR1072 is consistent with the essential requirements
and other relevant provisions of directive 1999/5/EC. The proper declaration for download from
www.lechpol.eu
EN
24
Owner's manual
Items to check
Is the power turned on?
Is the audio which is con-
nected with the audio cable
set to receive
the DVD signal output?
ls audio cable is connected
securely?
ls the monitor which is con-
nected with the audio cable
turned on?
Is the digital audio output set
in the correct position?
Is the remote control facing
at the remote sensor?
Is the distance too far?
Is there any obstacle in the
middle?
Is the battery exhausted?
Action to be taken
Check the car battery capacity
Select the correct input mode
for the audio receiver.
Connect the audio cable into
the jacks securely.
Turn one the monitor con-
nected with the audio cable.
Set the Digital Audio Output to
the correct position and then
turn on the DVD player again
by pressing the POWER
button.
Point the remote control to the
remote sensor of the product.
Use the remote control within
5m.
Remove the obstacle.
Replace with new batteries.
Check antenna connection.