Herunterladen Diese Seite drucken

SUPERNOVA The plug Anleitung Seite 5

Werbung

GENERAL USE & FEATURES
The Plug consumes almost no power if no device is connected. If 5V
(+/- ca. 0.2V) are supplied the green LED will turn on, regardless if
there is a device connected or not. If there is no device connected
and the internal voltage is too high (at high speeds), the Plug swit-
ches off automatically.
The Plug has been optimized to power devices that use USB stan-
dard as interface. Please note that the actual use and performance
of a device in combination with The Plug depends on the device's
individual charging and operating characteristic. The Plug generally
provides a power interface according to USB-specifcation type A.
This means that the USB wire 1 and 4 provide constant power of 5V.
The Plug does only supply power once a constant output of 5V can
be supplied. The actual riding speed in order to provide 5V output
depends on your device's individual charging and operating charac-
teristic. Please check with your device's manufacturer for compati-
bility and requirements. The following chart shows a basic overview
of output current depending on your speed. This, however, also de-
pends on the hub dynamo used.
The Plug has been designed for parallel use with a light system. Thus
there is no need to dismount any cable after its initial installation.
Please also see the light and dynamo manufacturer's instructions
for cable installation details. However please note that if The Plug
and a light system are used at the same time, both light and The
Plug's output performance will decrease based on the limitation of
the hub dynamo. Thus we recommend to use "either/or".
The Plug's electronics have been designed to be water-resistant.
How-ever depending on the conditions of use, the USB outlet might
show some initial rust corrosion over time. This rust film can be ea-
sily removed using a Q-tip with some alcohol.
Please note:
Never rotate the USB-Top-Cap (1) after installation, as
this might damage the connector cable.
Bitte beachten Sie, dass unter Umständen die Verwendung eines
Pufferakkus notwendig ist. Nähere Infos erhalten Sie bei unseren
Service Mitarbeitern.
8 | 9

Werbung

loading