Aigger HSM5657A Gebrauchsanweisung Seite 35

line and the needle finds itself on the left-hand side.
3 Turn the flywheel and let the needle come out of the material, set the button for choice of
pattern to B. After you have stitched both sides 5 or 6 times on both sides, you stop when
the needle is on the right-hand side.
4 Turn the flywheel and let the needle come out of the material, then set the button to C. The
needle is located on the right-hand side. Then stitch the right-hand side of the buttonhole.
5 Turn the flywheel, see to it that the needle leaves the material and then set the button to B.
The needle is located on the left-hand side. After you have stitched both sides 5 or 6 times
on both sides, you stop when the needle is on the right-hand side. (illustration 40)
Sewing zippers
Pressure foot Choice of pattern
Zipper foot "A"
1 Attach the zipper foot to the pressure foot as is described on page 29. (illustration 41)
2 Pin or tack the zipper to the material and then place it in the right position under the
pressure foot.
3 Then sew the zipper into the article of clothing. (illustration 42)
Hemming
Pressure foot Choice of pattern
Hemming foot "A"
1 Place the hemming foot on the machine as described on page 29.
2 Fold the material about 3mm from the edge and place it under the hemming
foot.(illustration 43)
3 Fold the material during sewing and guide it in the hemming foot.
4 See to it that the material under the right half of the foot does not move.
Guide the material properly through the foot as is shown in the picture.(illustration 44)
Sewing on buttons
Pressure foot Choice of pattern
Button foot "C" ~ "G"
1 Place the button foot as is described on page 29.
2 Tack or pin the button on to the spot you have marked. (illustration 50)
3 Adjust the machine to the correct stitch width (stitch selection button 3-7).
4 Test whether the needle falls into each hole, if necessary adjust the stitch width.
(illustration 51)
5 Let the foot drop.
6 Then sew the button on. (illustration 52)
Sewing of (blind) hems
Pressure foot Choice of pattern
Blind hemming foot "I"
Stitch length
1 - 4
Stitch length
1 - 4
Stitch length
0
Stitch length
1 – 3
English
35