Taking Pictures; Setting The Flash - Concord 5340z Kurzanleitung

7
1. Set the camera mode switch to
2. Aim the camera at the subject.
3. Press the T or W button to zoom in or zoom out the subject.
4. Press the Shutter button halfway down to activate the auto-focus until AF
LED stops blinking and the white AF Frame turned into green.
• The shutter speed and aperture values will appear on the LCD monitor.
5. Press the Shutter button fully down to capture the image.
8
You can change the image quality and resolution settings to suit your shooting purpose. Image resolution
determines the size of a captured image. Higher resolution images contain more details and have larger file
sizes. Image quality determines the amount of compression used to reduce the size of the stored image file in
order to economize space in the memory.
1. Press the
2. Press the
the SET or
3. Press the
press the SET button.
4. Press the
9
Use the flash according to the guidelines below:
1. Press the
selected flash mode icon will appear on the LCD monitor.
2. Shoot the image.
Downloaded from www.Manualslib.com

TAKING PICTURES

.
SETTING IMAGE QUALITY AND RESOLUTION
button.
MENU
or button to select Resolution or Quality, then press
button.
or button to select the settings you wish to set then
button to close the menu window.
MENU

SETTING THE FLASH

Auto The camera judges if a flash is required. If the environment is too dark, the
flash will fire.
Red-eye The flash fires automatically as required by the lighting level, and the flash
reduction, pre-strobes before shooting to reduce red-eye phenomenon.
Force on The flash always fires.
Force Off The flash does not fire.
button repeatedly to switch between flash modes. The
manuals search engine
Flash icon
3