Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. descriPciÓn del PAneles Y mAndo A distAnciA
1 2
1.Remote Sensor: Detects the infrared signals from the remote control unit.
2.POWER LED: Shows the state of the receiver:
1. LED on: The receiver is on;
2. LED blinks slowly: The receiver is in Standby mode;
3. LED blinks quickly: The receiver is being updated through RS232 port;
4. LED off: The receiver is not supplied. Please, verify if the receiver is plugged or if the
switch at the rear panel is on.
1
2
1. ANTENNA IN: Terr. input of the digital tuner.
2. LOOP OUT: Terr. ouput for cascading to others devices.
3. RS-232: Serial Port allowing software upgrades.
4. POWER ON/OFF: Allows to completely switching off the receiver.
5. S/PDIF: Coaxial output for digital audio (AC3).
6. TV SCART: Output SCART for the connection to a TV set.
7. VCR SCART: Output SCART for the connection to a VCR.
8. IN 12-24 VDC: 12-24 VDC connection (power supply).
remote control & PAnel descriPtion
6
5
PAG.9
7
3
8
4
Werbung
Inhaltsverzeichnis
