Veho VCC-003 Muvi Micro Handbuch Seite 7

Veho MUVI Operation (cont)
7. To use sound activation mode move sound activation switch on right hand side MUVI to on
and power switch on left hand side to on. When MUVI recognizes sound of more than 65
decibels it starts recording. If MUVI recognizes no further sound greater than 65 decibel for 2
minutes it will save MUVI files and enter standby mode. When in standby if sound of greater
than 65 decibels is recognized again the MUVI will enter recording mode again.
8. To transfer MUVI footage to your PC connect via USB mini jack to PC USB port. Ensure power
is on and sound activation is off. The MUVI will be recognized as a USB mass storage drive.
Drill into the drive and view/move/copy/delete the MUVI footage as you please.
Important Information
1. If while in recording mode the power button is switched to off, the MUVI footage for that
recording session will not be saved.
2. During long recording sessions the MUVI will automatically save a file of 800mb every 30
minutes of recording.
3. While connected to the PC the LED indicator will show red for charge but the MUVI is also
capable of record, standby and file transfer operations.
7