Playing Audio Cds; Repeat Function - JGC MEG-1006 Bedienungsanleitung

Playing audio CDs

• Turn the device to CD playback mode and as previously described, place an audio CD in the tray.
• The total number of tracks on the CD will be shown in the display (13).
• Playback/pause: Press the button
track number will blink in the display.
• Stopping playback: To stop playback, press the STOP button (11). The total number of tracks on the CD
will be shown in the display.
• Next or previous track: Use the
(9) is pressed once, the current track will be repeated from the beginning. When the button is pressed
twice, then the previous track will be played. When the button
played.
• Rewinding and fast forwarding: By holding down the
rewind the current track. Once the desired place has been found, let go of the button to continue playback.
During spooling, the sound will automoatically be set to zero.

Repeat function

• You can set this function during playback or in stop mode.
• Press the REPEAT button (18) once to continuously repeat the current track. REPEAT 1 will be shown in the
display (13).
• Press the REPEAT button twice to continuously repeat the entire CD. REPEAT ALL will be shown in the
display.
• Press the REPEAT button three times to turn off this function.
Programming a playback list
• You can program the CD player to play a set sequence of up to 20 tracks. The playback list can be
programmed in stop mode or during CD playback.
• Press the PROGRAM button (16) once to switch to programming mode. The number of the first memory
location 01 will be shown in the display. After that, the track number 00 and the control indicator PROG will
blink in the display (13).
• Using the (9) and
button (16). The second memory location (02) will be opened and can be set as previously described.
• Proceed as described above to program additional tracks.
• Press the button
• After all programmed tracks have finished playback, the CD player will stop automatically.
JGC-MEG-1006-IM-DE-EN-V1.indb 27
(8) to begin or pause playback. If playback has been paused, the
(9) and
(7) buttons, select a track from the CD. Save your selection with the PROGRAM
(8) to play the set program. PROG will be shown in the display.
(7) buttons to skip a track forward/back. When the button
(7) is pressed, the next track will be
(9) and (7) buttons, you can fast forward or
CD-PLAYER
27
30/11/2009 1:08 PM