Grundig CDP 410 Handbuch Seite 14

Selecting a different playback mode
The MODE button enables you to choose among five
different play modes.
• Press the MODE button repeatedly until the desired
play format appears on the display indicator.
GB
1 REPEAT 1: repeats only the chosen title.
2 REPEAT ALL: repeats all titles on the CD.
3 INTRO: plays the first 10 seconds of each title on
the CD; the CD player stops play after the last title.
4 RANDOM: plays titles in random order until all titles
have been played once; the CD player then stops.
5 No entry: normal play.
• The RANDOM function cannot be activated while
another program is in operation.
• To return to normal play mode, press the MODE
button until the display indicator is blank.
• To shut down the CD player, press the STOP 9 button
twice.
Programming
By programming the player you can play up to 20
tracks in any desired order. If you exceed the
maximum of 20 tracks, the programme function will
start again from the beginning. You may store each
track more than once.
Storing a programme
• Insert a CD and close the compartment.
• Press the PLAY·PAUSE 2; button to read the CD.
• Press the PROG button
and the display will flash
the letters .
P
• Select the first desired track using SKIP·SEARCH S
or T.
– The display shows e.g.:
• Store this number by pressing the PROG button.
– The display shows:
• Select and store in this way all desired titles.
14
CD PLAYER
1
1
ALL
2
INT
3
4
5
DAS TRACK MIN SEC
P
P
DAS TRACK MIN
Note:
While playing a programme, it
is possible to use SEARCH S
or SKIP T to select the
desired programmed tracks.
Playing the programme
• Press PLAY·PAUSE 2;.
– Playback starts with the first track of the programme.
– The display shows .
P
– After the last track playback stops.
The total playing time and number of tracks appear
on the display.
Note:
While playing a programme, it is possible to use
SKIP·SEARCH S or T to select the desired
programmed tracks.
Checking the programme
• Press the PROG button repeatedly until
the display.
– Each press of the PROG button will now show each
stored number in the order entered.
– Then, '00' appears again.
• You can now add tracks to the sequence as
described above (up to 20).
Erasing the programme
The contents of the memory will be erased:
– when you switch off the player;
– if the batteries become exhausted or if the power
supply is interrupted in another way.
– when the CD compartment is opened.
SEC
flashes on
P