Overview Of The Components; Intended Use; Start-Up Of The Device/Introduction - AEG SR 4339 Bedienungsanleitung

English
36

Overview of the Components

1 Telescopic antenna
2 Handle
3 CD compartment
4 TUNING control
5 Radio scale
6 Band selection switch (FM.ST / FM / AM)
7 Loudspeaker
8 OPEN/CLOSE (open/close) CD compartment
9 FM ST. control lamp
10 SKIP+ button (forward search)
11 STOP button
12 ALBUM button (album upwards)
13 USB port
14 PLAY/PAUSE/USB button (Play/Pause)
15 INFO button
16 MODE button (Repeat/random playback/memory)
17 SKIP- button (reverse search)
18 POWER control lamp
19 LCD display
20 Function selector switch (OFF / RADIO / CD/MP3/USB)
21 VOLUME MAX/MIN (volume control)
22 AC Mains connection
23 Battery compartment

Intended Use

This device is used for:
• The reception of radio programmes
• Playing back audio/MP3 CDs/files.
It is intended exclusively for this purpose and may only be
used as such.
It may only be used in the manner described in these instruc-
tions for use. The device must not be used for commercial
purposes.
Any other use of this device is considered to be contrary to
the intended use and may result in damage to materials or
even personal injury.
The firm ETV – Elektro-Technische Vertriebsgesellschaft mbH
does not accept any liability for damage caused as a result of
the use of this device contrary to its intended use.

Start-up of the device/introduction

• Please read the operating instructions carefully before
using the device for the first time!
• Select a suitable location for the device, such as a dry,
flat, non-slip surface on which it is easy to operate the
machine.
• Ensure that the device is sufficiently ventilated!
• Remove the protective film from the display if it is still
present.
Power Supply
• Connect the power cable supplied (see battery compart-
ment if necessary (23)) to a properly installed 230 V /
50 Hz safety power socket and the mains connector
AC (22) on the back of the machine.
• Ensure that the voltage is the same as that indicated on
the model identification plate.
Inserting the Batteries (not supplied)
• Open the lid of the battery compartment (23) on the bot-
tom.
• Insert 6 batteries of type UM2/R14 1,5 V. Please ensure
that the polarity is correct (see the floor of the battery
compartment)!
• If the device is not used for a long period of time, remove
the batteries to avoid the spilling of battery acid.
• Then close the battery lid.
NOTE:
When a mains cable is connected the batteries are auto-
matically switched off.
CAUTION:
• Different battery types or new and used batteries must
not be used together.
• Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at the
relevant collection bin or at your dealer' s .
WARNING:
Do not expose the batteries to high temperatures or direct
sunlight. Never throw batteries into the fire. There is a
danger of explosion!
Transport Safety Device, CD Compartment
• Use the OPEN/CLOSE button (8) to open the CD com-
partment (3).
• Before operating the machine for the first time, re-move
the transport safety device from the CD player if it is still
in place.
Volume
The desired volume can be sent using the VOLUME / regula-
tor (21).
Switch-off
The machine is switched off when the function selector switch
(20) is turned to the OFF position.The POWER (18) control
lamp goes off. Unplug the device.
USB port (13)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the