Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Repeat program play
You may use the program play and the repeat play features together to continuously repeat a programmed
playback. First program the desired playback sequence, then press the REPEAT button to select repeating the
current track or the entire programmed sequence.
TIMER FUNCTION
You can set the timer to switch on the system at your desired time, listening mode and volume level.
1.
Press the TIMER button to toggle the timer function between "On" and "Off", the display will show the timer
on/off status, the timer on mode and the time.(F.20)
2.
To set the timer, press and hold the TIMER button until the display shows "Timer Set" and the "hour" digit of
the timer clock in the display will flash. (F.21
3.
Press the ▲ or ▼ buttons to set the time and press the TIMER button to confirm, first set the hour and then
the minute.
4.
When the time to switch on the system is set, the display will show the timer on mode and flash, press the ▲
or ▼ buttons to select the mode (CD/FM/DAB), then press the TIMER button to confirm and the timer on
mode is set
5.
The display will show the volume level and flash, press the ▲ or ▼ buttons to select the timer on volume
level, then press the TIMER button to confirm and the timer setting is now completed.
SLEEP FUNCTION
This function allows you to program the system to switch off itself after a set period of time.
1.
To activate the sleep function, repeatedly press the SLEEP button, the sleep time in the display will change in
sequence on every press:
90
2.
When the display shows your desired sleep time, release the button, the sleep timer is now activated. The
display will show "S#" in which "S1" is to indicate "10 minutes" sleep time and so on. (F.22)
3.
To cancel sleep function, press the SLEEP button once, the display will show "Sleep-Off" and the "S#" will be
disappeared.
MUTE FUNCTION (remote control only)
Press the MUTE button on the remote control will stop the sound from the speakers temporarily, the display will
show "MUTE" and flash. To cancel mute and restore the sound, press the MUTE button again or the VOLUME +/-
button, the "MUTE" will disappear in the display.
HEADPHONE JACK
A 3.5mm type stereo headphone jack is located on the front panel. Connect a set of stereo headphones (not
included) to this jack for private listening without disturbing others. The external speakers are automatically
disconnected when the headphones are in use.
IMPORTANT: When using headphones always set the volume to a low level before you put the headphones on.
Then insert the headphones and gradually increase the volume to a comfortable listening level.
F20
80
70
60
50
40
30
of
f
F22
UK-6
F21
20
10
Werbung
Inhaltsverzeichnis
