Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Progarmme type
This describes the style of the programme that is being broadcast. If the information is not available, the display will
show "[No PTY]".
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a single
frequency. There are national and local multiplexes, local ones contain stations that are specific to that area.
Note: Press and hold the DISPLAY/INFO button for longer than 2 seconds, the software version number will be
displayed.
FM radio
1.
To select FM, press the DAB/FM button, the FM frequency will be displayed. (F. 8)
2.
To activate auto search, press and hold the I◀◀ or ▶▶I buttons until it starts to scan down or up the
frequency band, it will stop automatically once a station has been found.
3.
To activate manual search, repeatedly press the I◀◀ or ▶▶I button.
4.
To select audio mode, press the SELECT button to toggle between the "Auto" or "Mono" selection.
Note: The radio will automatically switch between stereo and mono mode, but you can override this and switch
this function manually which is helpful for poor signal reception.
STORING AND RECALLING PRESET STATIONS
In either DAB or FM, you can store up to 10 stations to the favourite presets; this will enable you to get direct
access to your favourite stations.
1.
To store a preset, first tune to your desired station, then press and hold the PROGRAM button until the
display shows the preset number and flash. (F. 9)
2.
Press the ▲ or ▼ button to select your desired station preset number.
3.
Finally press the PROGRAM button to confirm your selection, the display will show "Preset # stored". (F.10)
4.
To recall a preset station that you have stored, press the PRESET +/- buttons on the remote, the display will
show the preset number and the associated information. It would tune to the station in one second after the
buttons are released. (F.11)
FACTORY RESET
When you move the system to another part of the country, your pre-tuned and stored DAB stations may no longer
be available. If this is the case then you will need to reset your system back to its original factory settings; to
perform a factory reset, please do the following:
1.
Connect the unit to mains and press the STANDBY/ON button once to turn the unit on.
2.
Ensure the unit is in DAB mode, then press and hold the MENU button until the display shows "Press
SELECT to confirm reset".
3.
Release the MENU button and press the SELECT button once, the display will show "Restarting..." and then
perform auto scan function.
4.
After the scan has finished, the radio will select and display the first alphanumerically found station.
Note: All of your stored DAB & FM presets will be lost once the reset has taken place.
LISTENING TO YOUR COMPACT DISCS
NOTE: Although this CD player can read CD-R and CD-RW discs in addition to normal CDs, the playability of
CD-R and CD-RW discs may be affected by the type of software that was used to create the discs, as well as the
quality and condition of the blank media you are using, 100% playability cannot be guaranteed. This is not an
indication of a problem with the player.
F 9
UK-4
F8
F10
F11
Werbung
Inhaltsverzeichnis
