Technical Specifications; Main Components; Special Safety Instructions - Electric House 79664 Gebrauchsanweisung

INSTRUCTION MANUAL
Introduction
To get the most out of your new convector heater,
please read through these instructions and the en-
closed safety instructions before use. Please also save
the instructions in case you need to refer to them at
a later date.
Technical specifications
Max. heat output: Max. heat output:
Gas type:
Dimensions:
3 heat settings
2 safety functions
Electronic ignition
For use with 11 kg gas bottle
Supplied with hose and regulator
ENGLISH

Main components

1. Ignition button
2. Heat setting selector
3. Cabinet
4. Heating element
5. Grille
6. Wheels
3,600 W 3,600 W

Special safety instructions

butane
The gas system and regulator must be checked for
75 x 45.8 x 41 cm
leaks using soapy water and if necessary repaired
before use (see ‚Testing for leaks').
Always ensure that hoses to and from the gas bottle
and any joints will not be damaged during use.
Supply pressure must be 28-30 mbar.
Never use gas bottles or valves that are damaged or
rusty.
If you smell gas during use, close the gas bottle
regulator immediately. Open all doors and windows,
air the room out and test for leaks as described in
‚Testing for leaks'.
The heater can become very hot during use and must
therefore not be used in the vicinity of inflammable
materials, including curtains, clothing and furniture.
Keep all inflammable materials away from the heater.
Do not cover. Never use for drying clothes etc.
Never pour water on the heater while it is hot, as it
can damage the surface.
Never move the heater while in use. Switch off and
allow to cool before moving.
Close the gas bottle regulator when the heater is not
in use.
15