Ventus W164 Handbuch Seite 7

WEIGHT & VOLUME MEASUREMENT
Weight scale is built in the measuring cup and it can measure the weight of your food and display the volume of your
selected ingredients (water, milk, oil, sugar or flour)
To ensure accurate measurement, you are suggested to check the weight of an empty cup every time you first turn on the
unit. It should read 0 gram (or oz) for your empty cup. If not, please calibrate the cup following the instruction in the
"CALIBRATION" section.
Weight Measurement
1) Select "SCALE" display mode by pressing [m] button repeatedly until the arrow icon is pointing to "Scale"
2) Press [u] to change the weight unit between gram or oz if needed
3) Place the ingredient into the cup
4) Place the cup on a flat table to display the reading. Once reading is shown, you may also hold the cup on hand for easy
viewing
Weight unit selection:
The display resolution of "LBS OZ" is 1/8 OZ. If finer resolution and higher accuracy is required, please select gram for the
measurement and convert back to LBS OZ if needed.
Volume Measurement
1) Select the ingredient between water, milk, oil, sugar or flour by pressing [m] button repeatedly
2) Press [u] to change to the desired unit if needed
3) Place the ingredient into the cup
4) Place the cup on a flat table to display the reading. Once reading is shown, you may also hold the cup on hand for easy
viewing
NOTE: The volume measurement is converted from the weight & the pre-set density of the ingredient by the processor in
the cup. There are different types of milk, oil, sugar or flour in the market. Different types, brands & origins of the same
ingredient have different density. For this reason, some variation on the volume measurement will occur depending on the
type of ingredients you are using. The volume reading provided by the cup can only be used as an approximate value.
The density and type of ingredients being used in the cup are shown below.
Water
Milk:
Oil:
Sugar (Granulated sugar)
Flour (All purpose flour – unsifted)
The display resolution of "FL OZ" & "CUPS" is 1/8. If finer resolution and higher accuracy is required, please select mL (or
gram) for the measurement and convert back to FL OZ or CUPS if needed.
Tare (set zero) Function
It is easy and convenient to build up & mix different ingredients together all in the same cup. After the first ingredient is
added and measured, you may add another ingredient after performing the tare function below.
Place the cup with first ingredient on a flat table.
-
GRAMS and LBS OZ
Density
1 kg/L
1.03 kg/L
0.9 kg/L
0.84 kg/L
0.6 kg/L
units selection available
mL, CUPS, FL OZ
mL, CUPS, FL OZ
mL, CUPS, FL OZ
GRAMS, CUPS, LBS OZ
GRAMS, CUPS, LBS OZ
6