Ventus W164 Handbuch Seite 6

Digital Measuring Cup Scale
Thank you for purchasing the latest digital measuring cup scale. Designed and engineered with the state-of-art technology
and components, this instrument will provide reliable weight and volume measurement of different ingredients for baking and
cooking. Read this manual carefully to fully explore the features and functions of the new product.
Name and Functions of Buttons:
Press Functions
0 (zero) Turn on the unit
Tare or reserve tare
M (mode) Change the display mode
U (unit) Select display unit
The transparent cup is detachable for cleaning. Press the button below the handle to unlock and detach the cup from the
base. For normal operation, attach the cup to the base.
INITIAL SETUP AND BATTERY REPLACEMENT
Initial Setup
- Make sure the transparent cup is attached to the base
The unit comes with a battery. For first installation, pull out the insulation sheet from the battery door to turn on the unit.
-
Right after the unit is powered on, place the empty cup scale on a flat table and it should read 0 (gram, or Cups). (Go to
-
"calibration" section to calibrate the cup if the reading is higher than 0)
Battery replacement:
Slide down the battery door to open. Replace 1 piece of CR2450 battery according to the polarity indicated and close the
battery door.
Power On/Off
Make sure the cup is attached to the base. Place the cup scale on a flat surface and press the [0] button to turn on the unit.
To ensure accurate measurement, you are suggested to check the weight of an empty cup every time you first turn on
-
the unit. It should read 0 gram (or oz) for your empty cup. If not, please calibrate the cup following the instruction in the
"CALIBRATION" section.
Hold [0] button for 3 seconds to turn off the unit
The unit turns off automatically after 5 minutes in idle state
Hold 3 seconds
Turn off the unit
5
Owner's Manual
Hold 6 seconds
When the unit is on, hold 6 sec
to calibrate an empty cup