Herunterladen Inhalt Inhalt Diese Seite drucken

Salter SL2079 Gebrauchsanleitung Seite 3

Inhaltsverzeichnis

Werbung

OPERATING YOUR SCALE
1. Attach strap around luggage handle with buckle facing you. Ensure
buckle is securely engaged and strap adjusted to take up excess.
2. Hold scale with one hand.Allow strap to dangle beneath scale to enable
an accurate zero reading.
3. Press button to switch scale on.Wait until display shows zero.
4. Gently lift scale until luggage is off the floor.
5. When a stable weight reading is achieved the scale will beep.
6. Lower the luggage to the floor.
7. Weight is displayed for approximately 1 minute before switching off, or
press button to switch off.
ACCURACY AND ALLOWANCES
Some factors affecting accuracy need to be allowed for:
If the strap is pulled while taking a zero reading or the luggage touches
yourself or an obstacle during weighing this can affect the accuracy.
Your scale rounds up or down to the nearest increment. If you take two
readings and get different readings, the weight lies between the two.
Your scale readings may not match the airline check-in desk due to
manufacturing tolerances.
After a flight allow the scale to return to room temperature before use.
For these reasons we recommend your luggage weighs at least 500g/1.1lb
less than your airline allowance, this should also allow you to take your
luggage scale with you.
4
ADVICE FOR USE AND CARE
Do not exceed the 40kg/88lb maximum weight capacity
Clean your scale with a damp cloth. Do not use chemical cleaning agents.
Do not use scale if the strap or buckle show any signs of fatigue.
Treat your scale with care – it is a precision instrument.
Do not drop it.
TROUBLESHOOTING GUIDE
If you experience any difficulty in the use of your scale:
Check the battery is correctly fitted
Check that you have selected your preference of kilos or pounds.
If when you use the scale there is no display at all or if 'Lo' is displayed –
try a new battery.
If 'EEE' is displayed the scale has been overloaded.
WARNING INDICATORS
Replace battery
'Lo' + battery symbol
Weight exceeds maximum capacity
'EEE'
REPLACE BATTERY
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis