Ghibli 150S85 Handbuch Seite 77

OPERATIONS TO
PERFORM WHEN
NECESSARY
11.1.g - Replacing the brushes
(Fig. 31)
The brushes must be replaced whenever
they appear worn or whenever their bristles
are shorter than 2 cm. They must also be
replaced based on the type of flooring to be
cleaned; in order to replace them, perform
the following operations:
- Insert a hand beneath the brush support
unit (1). In order to detach the brush, turn
it quickly and forcefully in the opposite di-
rection from that in which it rotates during
normal function.
- Place the new brushes beneath the brush
support unit (1).
- Get into the driver's seat and turn the key
(2) to its "I" position.
- Engage a movement direction.
- Press the (3) button to enable brush
rotation; the brush unit will be lowered.
- By pressing the accelerator pedal (4),
the brush support flanges begin to turn,
thereby connecting with the brushes.
Then, release the pedal.
- Press the
the key (2) to its "0" position.
(3) button again and turn
4
1
2
EN - 31
EN
3 2
1
1
2
Fig. 31