Cleaning And Maintenance; Safety Information; Cleaning And Maintenance After Use; Thermostat With Temperature Probe - Caso BQ 2200 - 2830 Bedienungsanleitung

15 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

15.1 Safety information

Attention
Please observe the following safety notices, before you commence with cleaning the
device:
► The device must be cleaned and food residues must be removed at regular intervals. If
the device is not maintained in a clean condition, this will have a detrimental effect on
the service life of the device and can also result in a dangerous condition in the device
as well as in the growth of fungus and bacteria.
► Switch the device off prior of cleaning it and unplug the plug from the power outlet.
► After using the appliance is hot. Danger of burns! Wait until the appliance has cooled
down.
► Clean the grill after use as soon as it has cooled down. Extended waiting unnecessarily
complicates cleaning and can make it impossible in extreme cases. Excessive
accumulations of dirt can even damage the device under certain circumstances.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Do not use a sharp metal pusher
► Do not cut the food with a knife on the surface.
► No cleansing agents (except liquid soap), no nylon brushes or metallic brushes must be
used as the surface of the grillplate could be damaged.

15.2 Cleaning and maintenance after use

Dry the device after cleaning and before storing with a damp cloth. Remove the
temperature probe form the socket of the device.

15.2.1 Thermostat with temperature probe

If necessary wipe over with a damp cloth. Store in a safe place. Do not knock or drop the
thermostat with temperature probe.
Please note
► Do not immerse temperature probe in water or other liquids.
► Before inserting the temperature probe in the socket enseure that the socket is fully dry.
To do this wipe socket with a dry cloth.
caso BQ 2200 31