28541 AE vacuum cleaner L-O-A 10/27/06 9:30 AM Page 18
CLEANING AND CARE
Cleaning / Changing the filters
In order to ensure the safe working of your vacuum cleaner, the filters must be cleaned regularly. If a filter appears to be
very dirty or damaged, it must be replaced with a new filter.
Only use filters designed for this appliance and of the correct size.
Removing / cleaning the motor protection filter
•
Open the dust panel by pressing the dust panel release button below the suction opening, and by lifting the dust
panel.
•
Pull out the motor protection filter, including its housing, from the filter slots,
by sliding upwards.
•
Open the filter housing and remove the motor protection filter for cleaning.
•
Tap the filter to remove any dust trapped in it.
•
Wash the filter every so often by hand in cool soapy water. Rinse thoroughly with clean water to remove any
remaining dust particles and soap.
•
WARNING! Only place the filter back into the vacuum cleaner, when it is completely dry.
•
Place the cleaned or new motor protection filter back into the housing, and slide back into the slots. Finally, close the
dust panel.
Composite
C
M
Y
CM
MY
CY CMY
5
6
19
K
GB