Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b. dual filter
1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Press knob on low end of dust barrel to open the dust barrel cover.
4. clean
c. Air outlet filter
1. Press the air outlet grid knob to open
2. Take out the air outlet filter for clean and change.
Please note :
The sponge filter material in the cleaner will became dusty over time. This is normal and will not
affect the performance of the filter. If the sponge filter is so dusty that suction does not return to
100%, then we suggest that the filter be removed then rinsed under the faucet and allowed to
dryt for 24 hours by airing not near the fire or some high temperature objects before refitting into
the vacuum. This should be done once six months or when suction appears to be reduced
obviously.
Important:
Please note that there is a safety switch inside the vacuum to prevent the unit from being run with
high vacuum rate. If the vacuum is too high, the safety switch will be turned on. In this case, it
can minish the vacuum rate and protect the motor from being broken.
Note :
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will
overheat and could become damaged.
10
Pre‐motor
filter
Werbung
