Fixing The Telescopic Flues; Ducting Mode - DeDietrich DHD697 Betriebsanleitung

EN
2 / INSTALLING YOUR APPLIANCE
Install the flange in the device air outlet and
press slightly (Fig.6).

FIXING THE TELESCOPIC FLUES

•

Ducting mode

•
- Assemble the tube support using a 4 screws kit
(Fig.7); then, by means of the screw anchors and
screws (F) provided, fix the bracket to the ceiling
in such a way that it is positioned along the axis with
your hood (Fig.8).
- Connect the air outlet pipe to the air vent of the
hood.
- Use a flexible pipe and lock it to the air vent of the
hood with a metal hose clamp - Fig.9 (pipe and
clamp are not provided).
- For ducting hoods, turn the upper flue over so that
the air exhaust grid is in the lower section (Fig.10).
- Plug in the hood.
- Insert the extension flues setting them on the
hood; extend the upper flue to the ceiling and
secure with the 2 screws (H) - Fig.11.
Warning
This is the filtering version of your
cooker hood; you must first remove the
charcoal filter.
Tip
For optimal use of your appliance, we
recommend that you connect the hood to a
150 mm-diameter flue (not delivered with the
appliance). Minimise the number of angles
and bends and the lengths of the flue. In
the event that the hood will be operated
using out-door evacuation, you should
ensure a sufficient inflow of fresh air to
avoid a pressure deficiency in the room.
25
fig. 6
fig. 7
fig. 8
fig. 9