Introduction Bis L Identification Systems - Balluff BIS L-60_3 Handbuch

L60_3-025_829744_0608-e.p65
5
Principles
☞
Applications
6
System Components The main components of the BIS L Identification Systems are:
Configuration with
BIS L-6003 and
BIS L-6023
processor
(connection with
Trunk lines)
Schematic
representation of an
Identification System
(example)
6 E
Introduction
BIS L Identification Systems
This manual is designed to assist the user in setting up the control program and installing and
starting up the components of the BIS L Identification System, and to assure rapid, trouble-
free operation.
The BIS L Identification Systems belongs in the category of
non-contact systems for reading and writing.
This dual function permits applications for not only transporting information in fixed-program-
med data carriers, but also for gathering and passing along up-to-date information as well.
The BIS L identification system allows the use of read-only data carriers.
If 2 read/write heads are connected to a BIS L-60_3 processor, both heads can be operated
independently of each other. This means for example that you can read a data carrier from one
head while writing to another data carrier at the other head.
Some of the notable areas of application include
– for controlling material flow in production processes
(e.g. in model-specific processes),
for workpiece conveying in transfer lines,
in data gathering for quality assurance,
for gathering safety-related data,
– in storage systems for monitoring inventory movement;
– in transporting and conveying systems.
Introduction
BIS L Identification Systems
– Processor,
– Read/Write Heads and
– Data Carriers
DeviceNet
Processor BIS L-6003
BIS L-3_ _
1 ) Mixing of type BIS L-10_-01/L and BIS L-20_-03/L data carriers is allowed.
Processor BIS L-6023
Read/write head
BIS L-3_ _ BIS L-3_ _
Data carriers BIS L-1_ _-01/L and BIS L-2_ _-03/L
E 5
BIS L-3_ _
1
)