Problem Solving - Clarity ECE125 Bedienungsanleitung

2859 CE125 guide 17-10-2003
Using the amplifier
• •
Volume (see and )
F G
The Clarity™ amplifier ECE125 amplifies incoming
sound up to 15 decibels as a standard. If you
•
press the Boost button F , the ECE125 will
provide additional amplification up to 25
•
decibels. The Boost indicator G then
turns green.
The Boost function switches off automatically
when you place the handset back on the base.
Press the Boost button again for extra loud
amplification of your next call.
•
Tone control (see )
H
•
Use the tone button to control the tone of
H
the incoming voice.
To increase the volume of the high tones, slide
the button upwards.
To reduce the volume again, slide the button
downwards.
Clarity Power™ technology ensures that only
the high tones are amplified. This technology
not only makes calls louder, but also easier
to understand.
Warning:
•
If the Boost function F is switched on and /or
•
the tone control is not at the 'normal'
H
position the volume may be extra loud.
This mode is intended specifically for hearing
6
10:44 Pagina 12
impaired users and could be harmful to other
users. If you want to adjust the tone, slide the
control gradually. Avoid prolonged or
unnecessary exposure to high volume levels.

Problem solving

(solving problems yourself)
If you have problems, always check first whether:
1) all flexes are connected correctly;
2) the batteries are installed correctly or
whether they need to be replaced.
To check whether the problems are caused by
the amplifier, plug the telephone handset
directly into the telephone again, without the
amplifier in between.If this solves the problem,
it could be caused by the amplifier. If the
problem is not solved, it may be due to the
telephone or telephone line. In this case, contact
the manufacturer of the telephone or your
telephone company.
GB
7