Switching The Appliance On / Off; Connecting External Devices - VIVESS BTKH10001SW Technischer Handbuch

4. Operating instructions
The battery is being charged
The battery is fully charged
4. The charging duration of a completely empty battery is approx. 1.5 hours. A
fully charged battery allows the use of the appliance for approx. 5 hours. This
depends on the set volume.
Note: The appliance can only be charged while switched off. The
connection to an external Bluetooth® appliance will be separated
once this appliance is connected to an external power supply.

4.3 Switching the appliance on / off

1. Press the button
signal tone sounds and the indicator (2) flashes red
/ blue. The appliance is switched on. Bluetooth®
mode is activated
2. Press the button
signal tone sounds and the indicator (2) lights up
red for about 1 second. The appliance is switched off.

4.4 Connecting external devices

1. Switch the appliance on.
2. After approx. 10 seconds, the appliance is ready to
be used in Bluetooth® mode.
3. Switch on the Bluetooth® function of your external
appliance, which you want to connect to this
appliance.
4. To establish a connection with this appliance,
select "BT01" from the displayed list of Bluetooth®
appliances. Was a connection established
successfully, the indicator (2) will flash blue and a
short signal tone will sound.
English
The indicator (2) is constantly blue
(6) for approx. 5 seconds. A
(6) for approx. 5 seconds. A
The indicator (2) is constantly red
27