Switching The Appliance On And Off; Connecting External Appliances - VIVESS BTKH9001SW Bedienungsanleitung

4. Operating instructions
4. The charging duration of a completely empty battery is about 1.5 hours. A
fully charged battery allows the use of the appliance for about 6 hours. This
depends on the set volume.

4.3 Switching the appliance on and off

1. Press and hold the button
appliance on. The indicator (3) lights up red and blue
and a signal tone sounds. The appliance is switched on.
2. Press and hold the button
to switch the appliance off. The indicator (3) switches
off and the appliance is switched off.

4.4 Connecting external appliances

1. Switch the appliance on.
2. The indicator (3) flashes blue. After about 10 seconds,
the appliance is ready to be used in Bluetooth® mode.
3. Switch on the Bluetooth® function of your external
appliance, which you want to connect to this appliance.
4. To establish a connection with this appliance, select "BTHK9001SW" from the
displayed list of Bluetooth® appliances. If a password is requested, enter 0000.
5. Was a connection established successfully, the indicator (3) light will flash blue
and a short signal tone will sound.
26
REWE_Vivess_Headphones (BT)_BTKH9001SW_144010382_IM-DE-EN_v1_A6.indb 26
NOTE: The appliance can only be charged while switched off. The
connection to an external Bluetooth® appliance will be separated once
this appliance is connected to an external power supply.
NOTE: Was the appliance switched off and back on, a connection
will automatically be established to the last connected Bluetooth®
appliance, if the Bluetooth® function of the external appliance is
activated and available.
English
(4) to switch the
(4) for about 3 seconds
3
4
29/08/2014 3:28 PM