Installing The Umts/Lte Module - Fujitsu Umts Montageanleitung

10 - English

Installing the UMTS/LTE module

To install the UMTS/LTE module, proceed as follows:
► Insert the UMTS/LTE module, contacts first, into the bay. Take care not to trap the antenna
cables.
► Carefully push the UMTS/LTE module downwards.
► Pull the protective tubes carefully away from the antenna contacts.
► Secure the UMTS/LTE module with the enclosed screws.
Before connecting the antenna cables, you must first remove the protective tubes from the
!
cables.
To prevent damage to the antenna contacts, connect the antenna cables carefully to the
!
corresponding ports.
Ensure correct connection of the antenna cables:
● Connect the orange antenna (2) to the AUX port
● Connect the yellow antenna (1) to the MAIN port
► Fasten the two antenna cables.
► To fit the cover again, stow the cables carefully in the recess of the UMTS/LTE module bay, as
shown.
► Place the cover over the bay and tighten the screws.
34
Installing the UMTS/LTE module in LIFEBOOK P771 / P772
2
1
Fujitsu