Transport Inspection; Storage - cgs prozessanalytik UNI 2010 Betriebsanleitung

E

3.3 Transport inspection

Important:
Check the entire shipment for completeness and possible transport damage immediately upon arrival.
Failure to observe the following instructions in the event of damage shall cease the obligation of the
insurer to render performance.
• Even in case of suspected damage: Only acknowledge receipt with reservation (e.g. including shipping
documents) by specifying the alleged damage.
• Assert claims for compensation against third parties:
Carriers, freight forwarders, warehouse keepers:
- demand joint damage inspection
- request a certificate of damage
- hold these liable for damages in writing and describe the damage in detail,
namely:
- in case of visible damage prior to accepting delivery of the goods
- in case of no apparent outward damage immediately upon discovery
• Set deadlines for complaints and observe these!
• Ensure mitigation of incurred damage and avoidance of further damage.
• Immediately consult an insurance adjuster to record the damage and provide advice for securing claims
against third parties and for measures to mitigate the damage incurred.
• Never change the status of the consignment and its packaging until the arrival of the adjuster insofar
this is not required to mitigate and prevent further damage.
• Immediately notify the insurer about the insurance case and quickly submit the complete claim
documents to accelerate claims settlement (latest time before any preclusion and/or limitation periods
for claims against third parties).

3.4 Storage

After unloading, the packages must be stored until installation in accordance with the shipping markings.
Packed machine parts and accessories may not be unpacked.
Observe the applicable regulations for storage:
• Store in a cool dry place. Maximum humidity: 60 %.
Make sure the packages are not stored outdoors.
Also ensure that the storage room floor is dry during storage.
• Protect against direct sunlight. Storage temperature 5° C to 35 °C.
• Store in a dust-free location!
• Avoid mechanical shock and damage.
• For longer storage over 3 months, check the conservation measures.
In case of aggressive weather conditions, conservation must be renewed if necessary.
Product:
Temperature controller UNI 2010 Revision 1.1 – Issue July 2017
54/85