General Information; Device Version And Validity; Information For Our Customers; General - cgs prozessanalytik UNI 2010 Betriebsanleitung

1 General information

1.1 Device version and validity

E
This documentation is restricted to the specified product and is only valid for this respective product. The
documentation describes the installation, implementation and maintenance of the device and provides
information about its function.

1.2 Information for our customers

Read this manual before commencing work on this device! It contains important information and data
that, when observed, will ensure the device functions properly and save service costs. Implementation
of this device is thereby considerably facilitated, leads to reliable measurement results and prevents
damage caused by improper use of the product.

1.3 General

This device has left the factory in a technically and operationally safe condition. To maintain this condition
and to ensure safe operation of this product, it must be implemented only in the manner specified by
the manufacturer. In addition, correct and safe operation of this product depends upon proper transport,
proper storage and installation as well as careful operation and maintenance.
This manual contains the information necessary for the proper use of the product described herein.
It is written for technically qualified personnel who are specially trained or have relevant knowledge in
the field of automation technology (measurement, control and feedback control systems).
Knowledge and technically correct implementation of the safety instructions and warnings contained in
this manual are required for the safe installation and implementation of the product described and for
its safety during operation and maintenance. Only qualified personnel have the necessary expertise to
interpret the generally applicable safety instructions and warnings in specific cases and to apply them in
practice.
This manual is an integral part of the scope of delivery even if a separate order is possible due to
logistical reasons.
Because of the large number of technical details, it is not possible to consider all the details for all
versions of the described product and for every conceivable installation, operation, maintenance and
implementation in systems.
If you need additional information, or should particular problems arise which are not sufficiently
covered in this document, please request the necessary information from your local or responsible CGS
representative.

1.4 Warnings and explanatory texts

This manual describes how you can properly run, commission, operate and maintain this device.
You must pay particular attention to all warning and explanatory texts. These are separated from the
text and specifically identified by the relevant icons. They provide you with valuable tips for avoiding
operating errors and accidents.
Product:
Temperature controller UNI 2010 Revision 1.1 – Issue July 2017
47/85