Qioptiq IL100c Betriebsanleitung Seite 15

- Turn-on Time: Here you can enter how long the LED lights per each flash impulse.
- Delay: After having registered a start pulse or a trigger impulse via the USB interface or
the 1-10V interface, the flash impulse will be executed with the indicated delay.
- Number of Repeats: Here you can set how many sequences should be executed. The set delay is used
as a break time between two "on times".
Note:
The given times can differ according to the used controller. Please adapt these times to your
individual application. The trigger function is retrigger able.
Example:
Starting time: t
on
Delay: t
v
Repeats: 3
trigger pulse
response signal
t
v
periodic time
t + t
on v
We recommend a standard setting as shown
here.
5. Enter flash data.
Please enter the turn-on time and the delay in
multiples of 1ms.
repeats
t t
v on
GB
15