Getting Started; Description Of Buttons And Switches - Qioptiq IL100c Betriebsanleitung

GB

Getting started

The LED IL100-Series are a plug & play device and very easy to use.
Please check before use whether ...
...the power cord is connected.
...the brightness is set to the desired value.

Description of Buttons and Switches

a) Electronic dimming
For the adjustment of the light (standby until 100%)
and for the activation of the memory function
b) Operation control
The blue LED glows as soon as the ring light has been switched on
c) Connection from the power adaptor
Please connect correctly before use
d) Connection from the spot light
Please connect correctly before use
e) LED modules
Flexible and quick exchange of LED modules and
an optional use of different optics and colours.
f) USB Connection
Connection to the PC
g) Functional Plug Connection
1-10V voltage interface and trigger input
a)
f)
e)
Brightness Control with Memory Function
The brightness can be processor controlled adjusted. The highest level is indicated by a double
blinking of the LED.
Memory function:
1. When switching off the device by pushing the button the last setting is automatically saved for
the next use.
2. Before an interruption of the power supply (e.g. withdrawing of the power adaptor or switch off of
the main switch) the last setting can be saved individually by the user:
•
At the preferred level please push the button for 3 seconds.
•
A double blinking of the LED signals a successful storing.
•
Now, the power supply can be interrupted.
12
b)
g)
d)
c)
Pin1 brown GND
Pin2 blue Trigger
Pin3 black 1-10V