Audio Pro LIVING LV22 Bedienungsanleitung Seite 5

OPERATING WITH THE LV-HUB
The Living LV-HUB (sold separately) provides convenient features such as listening to different sourc-
es in different rooms. The sources connected to the LV-HUB can also be changed via the speakers,
using the remote control.
House Code 1
Zone A
Room 1: LV33 by TV
Audio from TV
Connected sources:
TV
Apple TV ®
Turntable
Computer
1. Set all the speakers and the LV-HUB to the same House Code.
2. Set the speakers in each room to zone A, B or C.
3. Pair the LV-HUB with all the speakers (See Pairing in the relevant speaker manual.)
4. Connect up to 4 sources to the LV-HUB
You can now play to any of the speakers (even in different zones) from any source that is con-
nected to the LV-HUB.
Changing the source: use the remote control and aim it at the speaker in order to change the
source. You can change the source in each room via the speakers, using the remote control, and
listen to different sources in different rooms at the same time. Example:
- Watch a film with wireless sound in Room 1.
- Listen to music on a computer in Room 2.
- Listen to music via AirPlay® (via Apple TV®) in Room 3.
The speaker display will show the following for the sources: USB–LI–OP1–OP2
8
House Code 1 House Code 1
Zone B Zone C
Room 2: LV22 Room 3: LV22
Audio from computer Audio from Apple TV (AirPlay
Transmitting on House Code 1
PAIRED & UNPAIRED MODE WITH THE LIVING LV-HUB
Unpaired mode:
- Works with all Living speakers.
- Change source on the LV-HUB using the remote control.
- The LV-HUB is set to the same House Code as the speakers.
Paired mode:
- Works with LV22 and LV33 speakers.
- Change source on speakers (LV-HUB can thus be concealed).
- Network is protected from possible other Audio Pro networks nearby.
Note:
1. In paired mode: The source selection applies to the ZONE, i.e. all speakers set to the same zone will play
from same source.
2. If you add a TXD200 transmitter, and this is paired, you can also change the House Code on the speakers in
order to choose different transmitters from which to listen (for example, HC1 on LV-HUB and HC2 on TXD200.)
)
®
RESETTING THE SPEAKERS
Return to factory settings (volume 17, bass EQ 0):
Turn off the speakers using the remote control. Turn on the speakers again and press MUTE on the
remote control while the LED flashes. Press MUTE again. Now all the paired speakers (or all the
speakers in same zone) will have returned to the default settings.
SOURCE
SOURCE SOURCE
9