Connection And Adjustment Options - STG-BEIKIRCH RM/24V 2 Bedienungsanleitung

Connection and adjustment options

1
Control panel
2
3
4
STOP
5
6
Wind sensor
Connecting terminal:
Terminal
1. Voltage supply +24 V DC
2. Voltage supply -24 V DC
1
Control panel
3. Relay contact (operating contact)
2
4. Relay contact (closing contact)
3
4
5. Relay contact (opening contact) or wind sensor signal
STOP
5
6. Wind sensor signal
6
Jumper
Jumper settings
Pins 2 and 3 bridged -> relay contact (opening contact) is positioned on Terminal 5.
Pins 1 and 4 bridged -> wind sensor operation (only for WRM/2)
Wind sensor Relay contact
DIP-Switch
1 8
ON
DIP 1 Activation in windy conditions
For certain situations the wind detector can be switched off with DIP-Switch 1.
ON Wind detector in operation. Activation in windy conditions.
OFF Wind detector deactivated. No activation in windy conditions.
02/13424999763
Wind and rain detector WRM/2 24V and Rain detector RM/2 24V
Relay contact
(opening contact)
Factory setting
Note: For wind sensor operation DIP-Switch 7 must be switched to the ON position.
DIP-Switch
23