Abus TV7218 Installationsanleitung Seite 67

- The network connection of your PC is now configured.
3. Now start the Installation Wizard from the software CD supplied.
4. Follow the installation instructions of the Installation Wizard.
5. If installation is successful, start the program under Programs/Installation Wizard.
6. Following the program start, the Installation Wizard automatically searches for a connected network
camera.
7. If no camera is found in the first search, click "Search" for a new search.
Note:
The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be
from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes
from 15 seconds to 3 minutes, depending on the LAN status). The method of finding an IP address is
seeking from 192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the network
camera will be assigned to this IP address, and its subnet mask would be 255.255.255.0. If none of the
addresses is free, the network camera will try the range from 192.168.0.2 to 192.168.0.98. After an IP
address is assigned to the camera, the "Activity" status LED blinks.
Note: If no camera is found via the manual search, change the network settings of your PC as described in
the instructions.
9